TMF8829 Linux Reference Driver README.md

Description

This file describes the installation of the tmf8829 linux reference driver, and how to use it.

Compilation

The compilation was done with the ams-Osram provided image bookworm_4v0. Linux version 6.1.73-ams #1 Mon Apr 22 19:32:02 BST 2024 2024 armv6l

Files

Overlay Files The device tree overlay files for the tmf8829 prototyped on the Raspberry Pi zero. - tmf8829-overlay-fpc.dts evm configuration with flex printed circuit, EN gpio and INT gpio, I2C - tmf8829-overlay-fpc-polled.dts evm configuration with flex printed circuit, EN gpio and INT register polled, I2C - tmf8829-overlay-fpc-spi.dts evm configuration with flex printed circuit, EN gpio and INT gpio, SPI - tmf8829-overlay-fpc-spi-polled.dts evm configuration with flex printed circuit, EN gpio and INT register polled, SPI

Module File - tmf8829.ko

ams Raspberry USB Sensorbridge - ams-usb-sensorbridge.service

TMF8829 Application Hex file if an application patch file is required - tmf8829_application.hex

Installation

Configuration of Raspberry Pi zero:

1. Use the right image

   bookworm_4v0 (provided by ams-Osram)

2. connect to Raspberry Pi

   (e.g. using a windows powershell)

   ssh ams@169.254.0.2 Pw: ams

3. copy the right files on the Raspberry Pi /home/ams directory

   (this could be done with WinScp or with a shell and scp)

   • Module tmf8829.ko

   • Install script

     • tmf8829_install_i2c.sh for i2c communication
       or
     • tmf8829_install_spi.sh for spi communication
       for the polling int version
     • tmf8829_install_i2c_polled_int.sh for i2c communication
       or
     • tmf8829_install_spi_polled_int.sh for spi communication

   • Overlay file

     • tmf8829-overlay-fpc.dtbo for i2c communication
     • tmf8829-overlay-fpc-spi.dtbo for spi communication
     • tmf8829-overlay-fpc-polled.dtbo for i2c communication and int register polling
     • tmf8829-overlay-fpc-spi-polled.dtbo for spi communication and int register polling

   • Hex File ( if required )

   • ams-usb-sensorbridge.service

   • tmf8829_zmq_server.service

4. • chmod 777 tmf8829_install_i2c.sh
     or
   • chmod 777 tmf8829_install_spi.sh
     for the polling int version
   • chmod 777 tmf8829_install_i2c_polled_int.sh
     or -chmod 777 tmf8829_install_spi_polled_int.sh

5. sudo su (Super User mode)

6. • ./tmf8829_install_i2c.sh
     or
   • ./tmf8829_install_spi.sh
     for the polling int version
   • ./tmf8829_install_i2c_polled_int.sh
     or
   • ./tmf8829_install_spi_polled_int.sh

7. Optional:
   If the python zmq server sources will be installed and the server should be started at boot time, enable the zmq service.

   • systemctl enable tmf8829_zmq_server.service

8. sync

9. reboot (reboot system)

General commands on the Raspberry Pi

1. Connect to Raspberry Pi

   • ssh ams@169.254.0.2
   • Pw: ams

2. See pinout on Raspberry Pi

   • pinout

3. CPU information

   • cat /proc/cpuinfo

   Additional information

   • lscpu

   Number of cores

   • cat /proc/cpuinfo | grep processor | wc -l

4. Debug messages

   • list: dmesg
   • list and clear: sudo dmesg -c

5. Change Raspberry I2C frequency

   • in file: /boot/firmware/config.txt
   • reboot

6. Module Functions

   • list all modules: lsmod
   • insert module: sudo insmod tmf8829.ko
   • remove module: sudo rmmod tmf8829.ko
   • module info : modinfo tmf8829.ko

7. See running tmf8829 thread for interrupt handling

   • ps -ef

8. Makefile command for TMF8829

   • make CONFIG_SENSORS_TMF8829=m

9. The overlay file could be changed

   • copy overlay file to boot directory

   • if overlay files are generated

     • cp /home/ams/arch/arm/boot/dts/tmf8829-overlay-fpc.dtbo /boot/overlays
     • cp /home/ams/arch/arm/boot/dts/tmf8829-overlay-fpc_polled.dtbo /boot/overlays
     • cp /home/ams/arch/arm/boot/dts/tmf8829-overlay-fpc-spi.dtbo /boot/overlays
     • cp /home/ams/arch/arm/boot/dts/tmf8829-overlay-fpc-spi-polled.dtbo /boot/overlays

   • in /boot/config.txt add the desired overlay file:

     • dtoverlay=tmf8829-overlay-fpc
     • dtoverlay=tmf8829-overlay-fpc-polled
     • dtoverlay=tmf8829-overlay-fpc-spi
     • dtoverlay=tmf8829-overlay-fpc-spi-polled

   • echo "dtoverlay=tmf8829-overlay" >> /boot/firmware/config.txt

10. Change and see log level

    • echo > /proc/sys/kernel/printk
    • cat /proc/sys/kernel/printk

11. See temperature and cpu frequency

    • vcgencmd measure_temp
    • vcgencmd measure_clock arm

12. Change raspberry configuration

    • sudo raspi-config

13. see the running services

    • systemctl

14. start / stop the running tmf8829 zmq service

    • systemctl start tmf8829_zmq_server.service
    • systemctl stop tmf8829_zmq_server.service

General Raspberry Information

Information for Broadcom BCM2835 GPIO (and pinmux) controller

https://www.kernel.org/doc/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt

Raspberry pi Documentation

https://www.raspberrypi.com/documentation/computers/raspberry-pi.html

System File System

• I2C Bus 0 (fpc): /sys/class/i2c-adapter/i2c-0/0-0041/

Common Attributes (tmf8829_common)

This section describes the common attributes with examples.

1. chip_enable (R/W)

   • See chip enabled status: cat chip_enable
   • Enable the device with the application including patch download: echo 0x01 > chip_enable
   • Disable the device: echo 0x00 > chip_enable
   • Enable the device in bootloader mode : echo 0x80 > chip_enable
   • Enable the device with ROM application : echo 0x02 > chip_enable

2. driver_debug (R/W)

   • Debugging statement for driver

     • 0x00 ... no logging
     • 0x01 ... only error logging
     • 0x08 ... this is a bit-mask check for clock correction logging
     • 0x10 ... some information
     • 0x20 ... very chatty firmware
     • 0x80 ... this is a bit-mask check for i2c logging
     • 0xFF ... dump everything

   • Show debug state: cat driver_debug (default 0x1)

   • Enable debugging: echo 0x10 > driver_debug

   • Disable debugging: echo 0x00 > driver_debug

3. program (R)

   • Version:

     • 0x80 ... Bootloader
     • 0x01 ... Application

   • See running program: cat program

4. program_version (R)

   • See program, major/minor/patch version, chip id and chip revision: cat program_version

5. registers (R)

   • Dump Registers 0x00-0xFF: cat registers

6. register_write (W)

   • example stop measurement: echo "0x08:0xFF" > register_write
   • example irq enabling: echo "0xe2:0x01" > register_write

7. request_ram_patch (W)

   The firmware tmf8829_application.hex located in /usr/lib/firmware will be downloaded. Only possible if the device is in bootloader mode.

   • Download Firmware patch: echo 1 > request_ram_patch

8. serial_number (R)

   • Show serial number cat serial_number

Application Attributes (tmf8829_app)

This section describes the application attributes with examples. The configuration parameters are described in the Config Page tmf8829_config_page. The application registers are described in tmf8829_application registers. See also Datasheet.

Attributes:

1. start_measurement (R/W)

   • Show cyclic measurement is running: cat start_measurement 0 ... not running 1 ... cyclic measurement running Note: not for single shoot measurements (period = 0)
   • Stop measurement: echo 0 > start_measurement
   • Start measurement: echo 1 > start_measurement

2. config_custom (R/W)

   Do not use !!! Read/Write all configuration parameters from/to the device as bytestream (hex).

   • Show configuration (hex): cat config_custom
   • Set configuration (hex): echo ... > config_custom

3. period (R/W)

   • Show measurement period in ms (dec): cat period
   • Set measurement period in ms(dec): echo 33 > period

4. iterations (R/W)

   • Show measurement kilo iterations (dec): cat iterations
   • Set measurement kilo iterations (dec): echo 500 > iterations

5. fp_mode (R/W)

   Should not be used !!! The config_mode attribute should be used!!!

   • Show the focal plane mode (dec): cat fp_mode
   • Set the focal plane mode (dec): echo 2 > fp_mode

6. result_format (R/W)

   See description of register 0x2A TMF8829_CFG_RESULT_FORMAT.

   • Show the value of the register TMF8829_CFG_RESULT_FORMAT (dec): cat result_format
   • Set the value of the register TMF8829_CFG_RESULT_FORMAT (dec): echo 1 > result_format

7. histograms (R/W)

   See description of register 0x2B TMF8829_CFG_DUMP_HISTOGRAMS.

   • Show histograms setting of the device (dec): cat histograms
   • Set histograms to 1 for dumping of histogram frames (dec): echo 1 > histograms
   • Set histograms to 0 for disabling the dumping of histogram frames(dec): echo 0 > histograms

8. config_mode (W)

   Command to pre-configure the device.

   • Set the configuration mode (hex): echo 0x40 > config_mode

   • Options:

     • 0x40 ... CMD_LOAD_CFG_8X8
     • 0x41 ... CMD_LOAD_CFG_8X8_LONG_RANGE
     • 0x42 ... CMD_LOAD_CFG_8X8_HIGH_ACCURACY
     • 0x43 ... CMD_LOAD_CFG_16X16
     • 0x44 ... CMD_LOAD_CFG_16X16_HIGH_ACCURACY
     • 0x45 ... CMD_LOAD_CFG_32X32
     • 0x46 ... CMD_LOAD_CFG_32X32_HIGH_ACCURACY
     • 0x47 ... CMD_LOAD_CFG_48X32
     • 0x48 ... CMD_LOAD_CFG_48X32_HIGH_ACCURACY

9. clk_correction (W)

   Command to activate / deactivate the clock correction for distance data. (default activated)

   • Activate (dec): echo 1 > clk_correction
   • Deactivate (dec): echo 0 > clk_correction

10. app_tof_output (R)

    Reading of frames with a size greater then 4096 (PAGE SIZE of linux driver) like histogram frames are not supported. The misc driver needs to be used. Note: The output buffer is a fifo buffer with 64k (PAGE_SIZE * 16).

    Every data frame has 4 four byte header. Byte[0] = FrameID Byte[1] = frameNumber (free-running number, increments with each frame) Byte[2] = clk_corr_LSB Byte[3] = clk_corr_MSB Byte[4] = reserved_0 (0x77) Byte[5] = reserved_1 (0x77) Byte[6] = payload_size_LSB Byte[7] = payload_size_MSB

    • FrameID:

      • TMF8829_COM_RESULT__measurement_res_frame 0xAA /**< measurement result frame */
      • TMF8829_COM_RESULT__measurement_hist_frame 0xBB /**< measurement histogram frame */
      • TMF8829_COM_RESULT__measurement_header 0xFD /**< measurement frame header only; for debug only should never occur in result frame */
      • TMF8829_COM_RESULT__error_frame 0xFE /**< error frame */
      • TMF8829_COM_RESULT__no_frame 0xFF /**< no frame / unhandled interrupt */

    • The clock correction factor is only available for result frames in Q1.15 numbering format.

      d = ( driver->clkCorrRatioUQ * d + (1<<14) ) >> 15;

    Result Data from I2C readout starting from register 0xFA. For content see datasheet.

    • Output data (binary) could be read: cat app_tof_output

Misc Device Driver

The Misc device driver which is a simple character driver is used to read the measurement frames. See Application Attributes app_tof_output .

• Get the measurement data: cat /dev/tof_tmf8829

Python File

After installation, the python folder /home/ams/tmf8829_zeromq_server_linux contains the python files for interacting with the driver.

All TMF8829 EVMs provide python sources with example files and zmq based scripts. The zmq-server interacts with the driver and over tcp-ports with the zmq-client.

File Description

See readme.md in /home/ams/tmf8829_zeromq_server_linux which has a file description for released python sources Linux driver EVM and Shield Board EVM.

Installation

1. Copy tmf8829_zeromq_server_linux.zip on the Raspberry Pi /home/ams directory.
2. Unpack the tmf8829_zeromq_server_linux.zip file.
   • unzip tmf8829_zeromq_server_linux.zip -d tmf8829_zeromq_server_linux

Example Files

The example file measurement.py could be used for a normal measurement. Modifications could be done in the area "User Settings".

python ./tmf8829_zeromq_server_linux/measurement.py

zeromq Server

The zeromq Server is used to connect to the linux driver over tcp ports.

python ./tmf8829_zeromq_server_linux.py

• See Raspberry connected with powershell:

  • Command ipconfig shows the IP

  • Command ss -tulw shows tcp ports

    Netid	State	Recv-Q	Send-Q	Local Address:Port	Peer Address:Port	Process
    tcp	LISTEN	0	100	169.254.0.2:5557	0.0.0.0:*
    tcp	LISTEN	0	100	169.254.0.2:5558	0.0.0.0:*
    tcp	LISTEN	0	128	0.0.0.0:ssh	0.0.0.0:*

zeromq Client

The logger description README.md in the folder /home/ams/tmf8829_zeromq_server_linux/client_info describes the usage of the logger and the output format. The zeromq client script could be used directly on the raspberry pi instead of the windows pc exe.

python ./tmf8829_zeromq_client.py

GUI

The TMF8829 EVM GUI could be used to see the results on a pc.