WARNING! This is an EXPERIMENTAL fedora installer.

⚠️ Running this may 🚨 erase all your data 🚨 🚑 🚑

⚡ You should only run this on a VM or garbage computer! ⚡

Architectural overview

• The goal is to be more flexible about the partitioning. The installed system should behave like any other fedora installation.
• We use the "Everything" fedora spin.
• Anaconda is used, but only as an entry point. In kickstart terms: the entire installation happens in "%pre".
• The installer is written in bash.
• Packages are installed via dnf.

How it started

See this thread: https://discussion.fedoraproject.org/t/how-to-install-fedora-without-the-installer-manual-installation/156292

Prepare the installation

Run make. This should create root.tgz.

Now that you have root.tgz, start a server. Here's an easy way to do this:

./serve

Write down the http address that is printed, and append "manual.cfg". For example: http://192.168.178.22:3001/manual.cfg

Instructions for iPXE

Configure kernel and initrd (sample URLs, use a mirror close to you):

kernel https://ftp.halifax.rwth-aachen.de/fedora/linux/releases/43/Everything/x86_64/os/images/pxeboot/vmlinuz inst.ks=http://192.168.178.22:3001/manual.cfg
initrd https://ftp.halifax.rwth-aachen.de/fedora/linux/releases/43/Everything/x86_64/os/images/pxeboot/initrd.img

If you have secure boot enabled, you also need to configure a shim:

shim https://ftp.halifax.rwth-aachen.de/fedora/linux/releases/43/Everything/x86_64/os/EFI/BOOT/BOOTX64.EFI

When everything is configured, start the installation:

boot

Read more about iPXE: iPXE commands, iPXE installation and EFI.

Downloading the iso

If you do not use iPXE, you will need to download an "iso file". Here's a sample download url: https://ftp.halifax.rwth-aachen.de/fedora/linux/releases/43/Everything/x86_64/iso/Fedora-Everything-netinst-x86_64-43-1.6.iso

VM instructions

If you use virtualbox or some other VM, you should be able to boot the iso file directly.

Installation medium instructions

If you do not use iPXE or a VM, you may need to create an "installation medium" from the iso file. For example, a usb drive. There are plenty of tutorials for this on the internet.

When you boot the installation medium, you will see a black "grub menu". Press up or down arrow key to cancel the timeout. Then, navigate to the first option "Install Fedora". Press "e" to edit the installer's kernel command line options.

At the end of the line starting with "linux", add an option inst.ks=http://192.168.178.22:3001/manual.cfg, assuming your http server runs on 192.168.178.22.